Water Process Solutions Ltd

We would like to take the opportunity to touch on a few of these products briefly in the following, by way of an introduction:

Chemical Metering Pumps:
When it comes to pumps, the Encore® 700 in its wide variety of configurations is a long standing and trusted partner in the chemical metering world, providing accurate and reliable operation for decades opposed to a few years. There are many oper-ational Encore® pumps in the market today and we are pleased to confirm that we are here in the UK and able to provide full support for these units, in the majority of cases, direct from our stocks.

The Encore® 700 diaphragm metering pump combines the robustness of hydraulic diaphragm pumps with the unparalleled economy, simplicity, and serviceability of a mechanical pump. Supplied with a cast iron gearbox assembly and the head mate-rials carefully selected for compatibility to the duty to be metered and the environment to operate within.
As mentioned, an excess of 20 years reliable operation is not an unrealistic desire with this range of metering pump and our confidence in this range is rubber stamped by a new 5 year warranty on newly supplied configurations. The existing field units can be fully supported through us and so should you require spares kits, upgrades or would like to discuss a refurbishment, then do not hesitate to contact us.

• The Encore® 700 mechanical diaphragm pump handles capacities up to 2500 l/h, discharge pressures to 12 bar.
• The Encore® 700 plunger pump handles capacities up to 290 l/h, discharge pressure to 200 bar.
• The pumps can be supplied with manual stroke control, which offers infinite continuous adjustment via the hand wheel over a 10:1 feed rate range. If remote adjustment is preferred, an electric stroke positioner mechanism for remote stroke length ad-justment can be supplied.

Register With Us:
If you operate an Encore® pump, please contact us to register your configuration on our database. We will be pleased to hear from you and work with you to ensure you continue to receive the optimal performance from your asset.

Polyelectrolyte:
The PolyBlend® systems are automated polymer feed systems for precise con-trol and economical performance of liquid grade polymers. Polyelectrolytes require specifically designed energy regimes during preparation to attain the correct physio-chemical state in solution to perform the tasks they were de-signed for.

That’s why the PolyBlend® automated polymer feed systems provide precise, programmable control of dosing rate, dilution levels, retention time and ener-gy. With this exclusive control of these process variables you can be sure your polymers have the ideal mixing environment. That means you get the maxi-mum yield efficiency from any polymer.
Features of this design include:

• High capacity mixing chamber. The unique multi-zone activation chamber is de-signed to give energy values appropriate to the swelling and hydration needs of the chemical through this operation.
• Flow sensors, variable set-points for low water protection, auto restart.
• Operates to a maximum water pressure: 5 bar.
• Mixer motor: 0.37 KW
• Single phase continuous duty

Electro-Chlorination:
Electro-chlorination is the process of generating a solution of Sodium Hypochlorite from three common place and readily available materials: salt, water and electricity. This process is economically proven to provide a low cost of ownership over the life of the systems.

The simple process occurs when a DC voltage is applied to a salt solution flowing between a series of electrodes. An electrical current results in a chemical reaction which produces a low strength Sodium Hypochlorite solution. The solution can be safely stored in a product tank and used to disinfection water.

Water Process Solutions are pleased to be able to offer a variety of approaches to on site generation needs and for lower capacity applications we have our WPS-P range. This range is typically suitable for process needs of less than 400 g/h of chlorine equivalent.

For the larger capacity requirements, WPS have the PSI MicrOchlor system available.

The patented MicrOclor design is the result of over twenty five years of experience in the manufacturing, installation and ser-vicing of hypochlorite generation equipment. Advancements in system safety and ease of operation make MicrOclor the over-whelming choice for facilities. The combined benefits of the following unique features make MicrOclor the most robust and durable system available today:

• Vertical/Multi Cell Configuration
• Direct Hydrogen Management
• Continuous Process Control
• Full Wave DC Power
• Compact Cell Design
• High-Velocity Electrolyte Circulation

Vertical/Multi Cell Configuration:
MicrOclor’s vertical “V-Ray” cell arrangement is the most significant of the many features that distinguish it from the earlier generations of equipment.
The V-Ray electrolytic cells are configured in a vertical array and vented directly to atmosphere. This prevents the chance of over pressurization by releasing all hydrogen directly from each cell. Other systems use the stor-age tanks as hydrogen separators which can contribute to excessive cell pressure and vibration in the discharge piping.
With Capacities of: 9-1088 KG per day chlorine equivalent. The MicrOchlor OSHG can generate Sodium Hypochlorite solution of 0.8% + 0.05% using a potable water supply and salt.

Chlorine analysis:
Accuracy, reliability and longevity are the baseline needs when discussing chlorine analysis within process monitoring and con-trol. Quality in performance and optimal process efficiency is not possible without accuracy and reliability and not operational-ly practical without longevity of service. The WPS chlorine analyser meets and exceeds those demands, further offering benefits of:

• Bufferless analysis – improving safety, saving chemicals, associated transport and operator intervention.
• Large clear display screen – providing easy operator interface.
• Low flow cell requirements – saving water consumption for analysis.
• Integrated low / loss of flow detection – providing remote confidence in sample feed for continued accurate analysis.
• Easy maintenance and calibration – designed for simple care and ‘fast cal’ to reduce menu scrolling.
• We welcome you to our organisation and look forward to working with you and supporting your business needs.

Sales enquiries, call Aran Bray +44 (0) 7557363728
Office Tel: +44 (0) 1622 719945 Thank you, The Water Process Solutions team.